Metalex Cryogenics invites you to Stall G123 at REFCOLD India 2026, from 19–21 November at Agriculture College Ground, Pune. Bring your cooling requirement and meet the team behind the Metalex industrial ammonia compressor range. Whether you are developing a cold store, planning an ice plant or expanding a processing facility, the conversation can start with your production schedule and the cooling it calls for.
What makes an ammonia compressor right for your plant?
Metalex starts compressor selection with a duty point. This is the refrigeration capacity needed at a specified pair of evaporating and condensing temperatures. The evaporating temperature relates to how the plant takes up heat from the product, room or process. The condensing temperature reflects the conditions under which the system rejects heat. Reviewing both lets the team assess cooling capacity and power at the same operating point.
The daily load tells the rest of the story. A cold store may need its highest cooling capacity during harvest intake and a smaller load once the crop reaches holding temperature. A dairy plant may have several processes calling for cooling at different times. Review those patterns with the Metalex project engineering team to discuss compressor capacity control and how equipment can be staged through the day.
Which Metalex compressor series can you discuss at Stall G123?
Metalex offers reciprocating ammonia compressors with different cooling arrangements, capacities and configurations. Use the series pages to shortlist options for your site, then bring your operating conditions to the stall.
- Metalex MX Series. Water-cooled reciprocating ammonia compressors for facilities with a suitable cooling-water supply. The range includes single-stage and two-stage models for different refrigeration duties.
- Metalex IS Series. Air-cooled reciprocating ammonia compressors with single-stage and two-stage models. Share the machine-room ambient conditions and ventilation arrangement when discussing a selection.
- Metalex MXT Series. The T Series product range includes single-stage models designed without compressor water cooling, with individual-cylinder capacity control and components designed for service access.
The Metalex reciprocating ammonia compressor guide walks through the range. For freezer or other low-temperature duties, the two-stage ammonia refrigeration guide explains how compression can be shared between stages.
How does compressor selection change by application?
Cold storage and horticulture
For Metalex cold storage projects, the discussion starts with the commodity, chamber temperatures, daily intake and time available to bring each batch to its target temperature. A fruit and vegetable cold store may need dedicated space for pre-cooling and holding. In potato cold storage, the crop’s intended use and peak harvest intake help define the design brief.
Dairy, meat and seafood processing
For Metalex dairy refrigeration projects, map the cooling loads across the shift, including product chilling, chilled-water demand and cold rooms, as applicable. For meat and seafood plants, share freezing batch sizes, the time allowed per batch and the holding temperature. Reviewing duties together gives the team a clearer picture of which loads run concurrently.
Tube ice, flake ice and block ice
An industrial ice plant selection begins with the ice format, daily output, incoming water temperature and production hours. Discuss Metalex tube ice plants for beverage and packaged ice applications or Metalex flake ice plants for seafood and food processing. The team can also review block ice production and the site's handling arrangements.
How does the compressor fit into a complete Metalex plant?
Compressor selection gives the engineering team a starting point for matching the industrial refrigeration plant equipment. Metalex evaporative condensers handle heat rejection where that arrangement suits the site. Metalex ammonia pressure vessels serve duties such as refrigerant storage and separation. Industrial refrigeration valves support flow control and isolation, while refrigeration control panels bring operating information, control and alarms into one place.
Reviewing the plant as a whole also lets you plan for service access, spare parts and future capacity. For a new facility, explore Metalex turnkey refrigeration projects. For an existing plant, bring the equipment list and operating records to discuss how an upgrade can fit into the planned production schedule.
What should you bring to your Metalex meeting?
- Application and capacity. Share the commodity, process or ice format, plus storage tonnage, batch size or daily output as applicable.
- Temperatures and schedule. Bring product and room targets, loading patterns, operating hours and any known evaporating and condensing conditions.
- Site utilities. Note the project location, power supply, cooling-water availability and machine-room layout.
- Existing equipment, if applicable. Bring the compressor nameplate, motor details, drawings or photos, and a summary of your expansion plans.
For an early-stage project, start with the application, output and location. Contact Metalex Cryogenics to share your brief before the show, or read the Metalex REFCOLD India 2026 exhibition preview for a wider look at the stall.
Frequently asked questions
Where can I meet Metalex at REFCOLD India 2026?
Meet Metalex Cryogenics at Stall G123 from 19–21 November 2026 at Agriculture College Ground, Pune, Maharashtra.
Which Metalex ammonia compressor series can I explore?
The Metalex ammonia compressor range includes the water-cooled MX Series, air-cooled IS Series and MXT Series designed without compressor water cooling. Metalex can review the range with you using your duty and site utilities.
Can Metalex help select a compressor for a cold storage project?
Yes. Metalex cold storage engineering can review the commodity, chamber temperatures, peak intake and cooling schedule. For produce projects, the Metalex fruit and vegetable storage team can discuss pre-cooling and holding requirements.
Can I discuss an ice plant at Stall G123?
Yes. Bring your target daily output, preferred ice format and production hours. You can explore Metalex tube ice plants and Metalex flake ice plants before the show or discuss block ice with the team.
Can Metalex review a compressor replacement or expansion?
Yes. Share the compressor model, motor details, site layout, actual operating conditions and added cooling capacity with Metalex project consulting. The team can review how the upgrade fits the existing plant.
Does Metalex supply equipment for the complete ammonia refrigeration system?
Yes. The Metalex plant equipment range includes compressors, condensers, vessels, valves and controls. Metalex turnkey project services can coordinate equipment selection with the plant design.
How can I continue the discussion with Metalex after REFCOLD?
Send your cooling requirement and project details to the Metalex project team. For an existing machine, Metalex service and support can help with service enquiries, spares and maintenance planning.