How to Choose the Right Metalex Tube Ice Machine Capacity

A Metalex guide to selecting tube ice machine capacity using daily output, production hours, peak dispatch, ice storage and site conditions.

To calculate the tube ice machine capacity your plant needs, divide your daily ice requirement by the hours available for production. A target of 12 tonnes in 16 hours calls for an average output of 750 kg per hour. Use your dispatch schedule to estimate how much ice you need in storage before each pickup.

How do you calculate tube ice machine capacity?

Required output (kg/h) = daily ice requirement (kg) ÷ available production hours. Use the hours the machine is expected to make ice. Record both the typical daily requirement and the requirement on your busiest operating day.

If you need 12 tonnes in 16 production hours, divide 12,000 kg by 16. Your target average output is 750 kg per hour. At that same rate, 24 hours of production would yield 18 tonnes. Use this 24-hour equivalent as a planning benchmark. Metalex can check the expected output of a specific model against your site conditions and production schedule.

How does peak dispatch affect ice storage?

Plot when ice will be produced and when it will leave the site. A plant may run through the afternoon and evening while customers collect most of their ice the next morning. An ice bin or refrigerated storage area can hold ice produced in advance and make it available for that pickup window.

For example, if a 4-tonne pickup is scheduled before production starts, plan to have 4 tonnes ready at dispatch, plus your usual allowance for storage and handling. Share the pickup schedule and the time ice will spend in storage so Metalex can review storage, bagging and dispatch together.

Which site conditions help Metalex confirm machine output?

Share the feed-water temperature, site location, available water supply and planned operating hours. Warmer incoming water requires more cooling before freezing. The site’s ambient conditions help Metalex assess the duty for equipment such as an evaporative condenser. If you have a summer water-temperature reading, include it in your brief.

Include the preferred tube size and how you plan to handle the ice after harvest. Bagged ice, bulk delivery and on-site use each give the project team different inputs for storage, handling and layout.

What tube ice machine capacities does Metalex offer?

The Metalex TIM Series ranges from 5 to 60 tonnes per 24 hours. Water freezes inside vertical stainless-steel tubes, and the automatic harvest cycle releases the ice for cutting. Metalex offers individual tube ice freezers and complete industrial ice plants.

Browse the TIM 5 TPD, TIM 10 TPD, TIM 15 TPD, TIM 20 TPD and TIM 25 TPD models. For higher output, see the 50 TPD project option and the TIM 60 TPD model.

For a complete plant, Metalex can review the freezer alongside the ammonia piston compressor, condenser, refrigeration control panels, storage and handling equipment. The plant equipment range also covers pressure vessels and refrigeration valves for projects that specify them.

What should you share with Metalex before requesting a quote?

Send your project location, intended use, required tonnes per day and available production hours. Add your busiest dispatch window, the quantity collected during that window, the preferred ice size and any storage or bagging requirements. Include feed-water temperature and available utilities where known.

With these inputs, Metalex can discuss a preliminary tube ice machine configuration and the scope of the supporting refrigeration plant.

Frequently asked questions

What does TPD mean on a tube ice machine?

TPD means tonnes per day. Metalex lists TIM Series capacities on a 24-hour basis. Share your available production hours and site conditions when requesting expected output for your operating schedule.

Can ice be produced overnight for morning dispatch?

Yes. When the operating schedule allows, the plant can build up ice inventory overnight and hold it for morning pickup. Metalex can review storage based on the pickup volume and holding time.

Can Metalex supply a complete tube ice plant?

Yes. Metalex offers individual tube ice freezers and complete ice-making solutions. A project discussion can cover refrigeration equipment, controls, storage and ice handling.

Can Metalex review a future capacity expansion?

Yes. Share your current equipment, daily output and planned increase in production. Metalex can review the requirements for the next phase alongside the existing plant.

Planning a Metalex tube ice plant?

Share your daily ice target, production hours and dispatch schedule with Metalex Cryogenics for a preliminary selection discussion.