Industrial ammonia refrigeration plants need pressure vessels for different refrigerant duties. Metalex builds both High Pressure and Low Pressure Vessels so project teams can match the vessel to the actual position, circulation method and operating requirement of the plant.
Both vessel types contribute to dependable refrigeration operation. The important step is to identify what the vessel needs to do within the system before deciding its capacity, orientation, connections and accessories.
Two Metalex vessel duties within one refrigeration system
Metalex High Pressure Vessel
Supports liquid ammonia storage on the high-pressure side and helps accommodate refrigerant inventory through changing plant conditions and project-specific pump-down requirements.
Metalex Low Pressure Vessel
Supports low-pressure refrigerant collection, liquid-vapour separation and steady liquid supply to evaporators through refrigerant pumps.
A complete ammonia refrigeration plant may include both vessel types because they perform different but coordinated duties. Metalex presents them together within its industrial refrigeration pressure vessel range.
Metalex High Pressure Vessel
The Metalex High Pressure Vessel is used as a high-side refrigerant receiver. It stores liquid ammonia, supports refrigerant inventory management and can support pump-down requirements when included in the plant design.
Metalex offers horizontal and vertical configurations. The current product reference lists 15 kg/cm² working pressure, 30 kg/cm² test pressure and ASME or IS 2825 code reference. Final construction, capacity, orientation and connection schedule are aligned with the project specification.
Metalex Low Pressure Vessel
The Metalex Low Pressure Vessel supports pumped ammonia recirculation. It collects low-pressure refrigerant returning from evaporators, supports liquid-vapour separation and helps maintain liquid supply to the refrigerant pumps.
The current Metalex reference lists ammonia service, pumped feed, 6 kg/cm² working pressure and 21 kg/cm² test pressure. Gauge glass, floats, isolation valves, safety valve, drain and purge arrangements can be coordinated with the required vessel scope.
“The right vessel direction begins with its refrigeration duty, plant position and circulation method.”Metalex Engineering Note
Coordinating vessels with the complete plant
A pressure vessel works with the compressor, condenser, evaporators, refrigerant pumps, valves and controls. Metalex connects vessel manufacturing with wider refrigeration plant equipment and engineering support, helping project teams review the equipment as one coordinated system.
Suitable industrial refrigeration valves support isolation and refrigerant flow, while Metalex control panels bring monitoring and protection functions together according to the project requirement.
Information to share with Metalex
For a useful preliminary discussion, share the vessel duty, refrigerant, working and test pressure, capacity or dimensions, orientation, required connections, pump details where applicable, plant application and project location.
The Metalex engineering team can then review whether the requirement points to a High Pressure Vessel, a Low Pressure Vessel or both as part of the complete ammonia refrigeration system. The wider pressure vessel specification guide provides additional RFQ information for detailed project stages.
Frequently Asked Questions
Yes. Metalex Cryogenics builds High Pressure Vessels for high-side receiver duty and Low Pressure Vessels for pumped ammonia circulation and separation duties.
It is considered when an ammonia plant requires high-side liquid refrigerant storage, receiver capacity and project-specific pump-down support. Review the Metalex High Pressure Vessel page.
It is considered for pumped ammonia systems requiring low-pressure refrigerant collection, liquid-vapour separation and steady liquid supply to evaporators. Review the Metalex Low Pressure Vessel page.
Yes. A complete system may use a High Pressure Vessel for high-side liquid storage and a Low Pressure Vessel for pumped evaporator circulation. Share the plant data through the Metalex Get Quote page for project-specific guidance.
Planning an ammonia refrigeration vessel requirement?
Share the vessel duty, refrigerant, pressure, capacity, orientation and project location with Metalex.